Features of the Fluke 789

• 24 V Loop power supply
• Very large dual display
• Enhanced backlight with 2 brightness settings
• 1200 Ohm drive capability on mA source
• HART mode setting with loop power and a built-in 250 ohm resistor
• 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
• Externally accessible fuses for easy replacement
• Infrared-port to process data in FlukeView Forms (V2.1) software

• 1000 V, 440 mA True-RMS digital Multimeter
• 0.1% dc voltage accuracy
• 0.05% dc current accuracy
• Frequency measurement to 20 kHz
• Min/Max/Average/Hold/Relative modes
• Diode Test and Continuity Beeper
• Simultaneous mA and % of scale readout
• 20 mA DC current source / loop calibrator / simulator
• Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
• Externally accessible battery for easy battery changes

• Meets 1000 Volt EN61010-1 CAT III standards and 600 Volt EN61010-1 CAT IV standards.

Fluke 110
Fluke 111
Fluke 112
Fluke 112/322-KIT
Fluke 12
Fluke 123/003
Fluke 123/003S
Fluke 124/003
Fluke 124/003S
Fluke 1520
Fluke 1550B
Fluke 16
Fluke 16/322-KIT
Fluke 175
Fluke 177
Fluke 179
Fluke 179/1AC-KIT
Fluke 179/EDA-KIT
Fluke 179/TPAK
Fluke 187
Fluke 189
Fluke 189/FVF
Fluke 192B/003
Fluke 192B/003S
Fluke 196B/003
Fluke 196B/003S
Fluke 196BM
Fluke 196C/003
Fluke 196C/003S
Fluke 196CM
Fluke 199B/003
Fluke 199B/003S
Fluke 199BM
Fluke 199C/003
Fluke 199C/003S
Fluke 199CM
Fluke 1AC-A1-5PK
Fluke 27-YEL
Fluke 321
Fluke 322
Fluke 333
Fluke 334
Fluke 335
Fluke 336
Fluke 337
Fluke 433/003
Fluke 434/003
Fluke 43B/003
Fluke 45
Fluke 45-01
Fluke 45-05
Fluke 45-15
Fluke 51-2
Fluke 52-2
Fluke 53-2
Fluke 54-2
Fluke 61
Fluke 63
Fluke 65
Fluke 66
Fluke 68
Fluke 705
Fluke 707
Fluke 707EX
Fluke 712
Fluke 714
Fluke 715
Fluke 724
Fluke 7-600
Fluke 77-3
Fluke 787
Fluke 789
Fluke 83-5
Fluke 87-5
Fluke 87E-5
Fluke CO-220
Fluke T3
Fluke T5-1000
Fluke T5-600
Fluke VR101/003S